Equipped with four Z-axis and four B-axis DD motors, it enables high-precision batch processing of complex 3D small hardware for mobile phones, smart wearables, earphones and other products.
联系我们
Automatic Tool Changer System：Linear/matrix type 21T tool magazine. Pre-preparation of tools greatly reduces tool change time and improves efficiency. Equipped with a tool magazine protection system, it effectively prevents iron chips from entering and extends the service life of the tool magazine.
Automatic Chip Conveyor System：Chip winding devices on both sides of the machine interior, controlled by M-codes in the program. Automatic start/stop control saves time on manual cleaning.
High temperature resistance Its heat capacity is twice that of cast iron, its thermal conductivity is less than 1/20 of cast iron, and the response amplitude affected by temperature is only 1/3. |
High damping It features excellent shock absorption and thermal stability, with a damping ratio more than 10 times that of cast iron, effectively eliminating vibration caused by high acceleration.The combination of superior damping performance and linear motors greatly improves workpiece surface quality and extends the service life of the machine. |
Anti-interference It is not affected by external magnetic forces and features strong anti-interference capability. |
High competitiveness It replaces traditional machining centers and solves the problem of low efficiency caused by a single shaft station on one machine.It realizes four shaft stations on a single machine, equivalent to a 4‑fold increase in processing efficiency.This effectively reduces high costs in terms of space, labor and equipment, and enhances the market competitiveness of products. |
High efficiency The four B‑axes can be controlled for displacement in the X‑direction via system servo, solving the problems of long time consumption for customer operation, machine adjustment, and model change processing. |
High precision Driven by DD motors, it enables multi-angle machining of workpieces in a single clamping, achieves extremely high dynamic performance, and solves the difficulty of machining complex curved surfaces. |
Item | Unit | YZ1140-4_I10TR | YZ1140-4_B12T | |
Processing range | X/Y/Z axis travel | mm | 260*450*200 | 260*450*200 |
Distance from spindle nose to worktable surface | mm | 145-345 | 145-345 | |
Spindle center distance | mm | 260 | 260 | |
Worktable | Worktable size | mm | 1060*450 | 1060*450 |
T-slot (size × spacing × number of slots) | mm | 12*80*5 | 12*80*5 | |
Maximum load capacity (uniform weight) | Kg | 220 | 220 | |
High-speed spindle | Spindle type - Taper | / | ISO25 | BT30 |
Maximum spindle speed | rpm | 36000 | 18000 | |
Spindle outer diameter / Weight | mm | 100 | 120 | |
Rated power | KW | 6 | 7.5 | |
Rated torque | Nm | 2.9 | 12.5 | |
Tool magazine | Tool holder type | / | ISO 25 | BT30 |
Tool magazine type - Number of tool positions | / | Matrix Type - 28 | Matrix Type - 19 | |
Tool change time (tool-to-tool) | sec | 10 | 10 | |
Maximum tool length (including tool holder) | Kg/mm | 160 | 160 | |
Maximum tool diameter (pot type) | mm | φ25（25位） | φ32（16位） | |
Maximum tool diameter (collet type) | mm | φ50（3位） | φ50（3位） | |
Transmission mode | X/Y/Z axes | / | Ball screw | |
Feed rate | Maximum rapid traverse speed（X/Y/Z） | m/min | 25 | 25 |
Maximum acceleration（X/Y/Z） | G | 0.5G | 0.5G | |
Accuracy | Positioning accuracy（ISO） | mm | 0.005 | 0.005 |
Repeat positioning accuracy（ISO） | mm | 0.004 | 0.004 | |
Power source | Power supply | KVA | 35 | 41 |
Air supply | Mpa | 0.65 | 0.65 | |
Others | Machine weight | Kg | 5500 | 5500 |
Floor space (LWH) | mm | 2030*2240*2389 | 2030*2240*2389 | |
咨询： 0769-83359826 
邮箱： 
地址： 广东省东莞市大岭山镇湖畔路中京科技园 