Dual X + Dual Y + Dual Z structure, enabling independent compensation for each axis. Suitable for high-precision batch processing of complex small hardware made of aluminum alloy, carbon steel, stainless steel and other special alloys.
联系我们
Automatic Tool Changer System：Servo-driven disc-type tool magazine with pre-tool preparation, which greatly reduces tool change time and improves efficiency. Equipped with a tool magazine protection system, it effectively prevents chips from entering and extends the service life of the tool magazine.
Automatic Chip Removal System：Double-sided internal chip winding devices controlled by M-code in the program, with automatic start/stop control, saving manual cleaning time.
High temperature resistance Its heat capacity is twice that of cast iron, its thermal conductivity is less than 1/20 of cast iron, and the response amplitude affected by temperature is only 1/3. |
High damping It features excellent shock absorption and thermal stability, with a damping ratio more than 10 times that of cast iron, effectively eliminating vibration caused by high acceleration.The combination of superior damping performance and linear motors greatly improves workpiece surface quality and extends the service life of the machine. |
Anti-interference It is not affected by external magnetic forces and features strong anti-interference capability. |
High competitiveness It replaces traditional machining centers and solves the problem of low efficiency caused by a single shaft station per machine.It realizes two shaft stations on a single machine, equivalent to a 2‑fold increase in processing efficiency.This effectively reduces high costs in space, labor and equipment, and enhances the market competitiveness of products. |
High precision Equipped with B/C axis rotary table and probe components, it enables multi-angle machining of workpieces in a single clamping, realizes three-axis independent compensation in X, Y, Z directions, achieves extremely high dynamic performance, ensures high precision requirements of products, and solves the difficulty of machining complex curved surfaces. |
Item | Unit | YZ1045D-2_I08TRM | YZ1045D-2_I10TRM | |
Processing range | X/Y/Z-axis travel | mm | 200*200*230 | 200*200*230 |
Distance from spindle nose to worktable surface | mm | 265-495 | 265-495 | |
Rotary table | Rotary table center height | mm | 180 | 180 |
Rotary table face diameter | mm | φ170 | φ170 | |
B-axis / C-axis rotary table positioning accuracy | arc.sec | ±20 | ±20 | |
B-axis / C-axis rotary table repeatability | arc.sec | ±4 | ±4 | |
Maximum allowable load | kg | 20 | 20 | |
B-axis / C-axis rated torque | N.m | 190 | 190 | |
B-axis / C-axis rated speed | rpm | 37 | 37 | |
High-speed spindle | Spindle Type - Taper | / | ISO20 | ISO25 |
Maximum spindle speed | rpm | 4000 | 36000 | |
Spindle outer diameter | mm | 80 | 100 | |
Rated Power | KW | 4 | 6 | |
Rated Torque | Nm | 1.6 | 2.9 | |
Tool magazine | Tool holder type | / | ISO 20 | ISO 25 |
Tool magazine type - Number of tool positions | / | Disc type - 21×2 | Disc type - 21×2 | |
Tool change time (tool-to-tool) | sec | 12 | 12 | |
Maximum tool length (including tool holder) | Kg/mm | 145 | 145 | |
Maximum tool diameter (pot type) | mm | φ15 | φ25 | |
Transmission mode | X/Y/Z axes | / | Ball screw | |
Feed rate | Maximum rapid traverse rate（X/Y/Z） | m/min | 18/18/18 | 18/18/18 |
Maximum acceleration（X/Y/Z） | G | 0.5G | 0.5G | |
Accuracy | Positioning accuracy（ISO） | mm | 0.005 | 0.005 |
Repeat positioning accuracy（ISO） | mm | 0.004 | 0.004 | |
Power source | Power supply | KVA | 13 | 20 |
Air supply | Mpa | 0.65 | 0.65 | |
Others | Machine weight | Kg | 4100 | 4100 |
Floor space (L*W*H) | mm | 2225*2090*2360 | 2225*2090*2360 | |
咨询： 0769-83359826 
邮箱： 
地址： 广东省东莞市大岭山镇湖畔路中京科技园 